|
|
|
|
|
|
We are an Australian company which deals with Naturel Gum Rubber (latex) and Vegetable (blended) Oil such as Palm Oil and Soya oil, Sunflower and others and have now diversed in to other types of rubber as well as becomeing a leader in Recycling rubber waste. SR-138 is our high-grade gum recycled from the rejected examination gloves. The process used in producing this grade is by using the application of mechanical shear breakdown with non-staining Oils and Chemicals. No fillers are added when producing this grade. The result is we have a High Grade Recycle Rubber which has a rubber content of almost 90%, a low specific gravity of about 0.95 and very high physical properties. Products cost are a major consideration; a large quantity of SR-138 can be used by substituting with the virgin polymer thereby resulting in the cost reduction. With the use of SR-138 the high physical properties and improved process ability are achieved. The manufacturing of products such as adhesives, tapes and sponge rubber, a long time is required to masticate the virgin polymer breakdown. Using SR-138 this process of pre-mastication can be eliminated. This advantage also reduces the processing cost by saving electrical energy and time. As the specific gravity is also low, the cost per kilo is also reduced.
The followings are the grades: -
1.SR 138 white (premium)- NR latex exam glove only
2.SR 138 LG white - NR latex materials only
3.SR 138 LG Black - NR latex materials only
4.TSR 88 Black - Truck tire derived
5.ACR 138 (nitrile rubber)- Nitrile latex
Process: SR-138 requires no mastication, faster and smoother mixing is achieved. Reduces the requirement of energy thus the heat produced.
Molding Process: Flows better in the mould, Clear design impressions are obtained from intricate designs, reduces the entrapment of air and low rejection rate is achieved.
Extrusion Process: Faster extrusion rate is obtained with reduced swelling.
Vulcanizing Process: Faster cure rates are obtained with no risk of reversion. |
|
|
1.SR 138 white (premium)- NR latex exam glove (DRC 90%)
2.SR 138 LG white - NR latex materials only (DRC 70%)
3.SR 138 LG Black - NR latex materials only (DRC 70%)
4.TSR 88 Black - Truck tire derived (DRC 50%)
5.ACR 138 (nitrile rubber)- Nitrile Material (90%)
6.PISOP 138 (Polyisoprene) - Isoprene Material (70%)
|
|
|
| Company : |
Central Aus Resources |
| Email: |
Contact us |
| URL: |
********
|
| Phone: |
*********
|
| Fax : |
*********
|
| Country : |
Australia |
| Address : |
*********
|
|
|
|
|
|
